These pallets are more readily available, but will have a more worn appearance than a new pallet. The specifications on the “A” Grade are more consistent than on a “B” Grade and won’t have any block repairs to the stringers. These have fewer cycles than a “B” Grade.

Specifications:

• 7 boards on top
• 5 boards on bottom
• Average top deck spacing 2.5” to 3.5”
• 3 stringers (1-1/2” x 3-1/2” each)
• 4 way entry
• Always flush and each stringer can have one repair plate to strengthen any split if needed

These pallets are primarily used for shipping and warehousing, where it is likely the pallet may be discarded and therefore is less expensive than an "A" Grade pallet.

Specifications:

• 6 to 7 boards on top, depending on board width which can be 3.5 to 5.5 wide)
• No less than 4 boards on bottom
• Average top deck spacing 2-1/2” to 3-1/2” but can be up to 4” 3 stringers (1-1/2” x 3-1/2” each)
• 4 way entry
• Always flush
• They have repairs on stringers and can be various lengths and locations
• No more than 2 boards (stringers) thick at any one point